Search
Search

banner

/
/
/
E-Paper Adapter Board | SPI EPD Driver with Touch & Front Light, Compatible with Raspberry Pi & STM32 | STM32-FT01
1/1
Number of views:
1000

E-Paper Adapter Board | SPI EPD Driver with Touch & Front Light, Compatible with Raspberry Pi & STM32 | STM32-FT01

Drives SPI e-paper displays up to 13.3", supports 7.5" touch panels and 21V front light modules, and is plug-and-play compatible with Raspberry Pi & DESPI-M02L.
Number of views:
1000
Product serial number
60800011
Quantity
-
+
OVERVIEW
SPECIFICATION
DOWNLOAD

Product Features

Engineered to solve real-world development challenges

Driver IC Compatibility
 
 
 
 

Instant RESE Matching

P3 DIP switch selects boost reference resistor: 0.47Ω (UltraChip) / 2.2Ω (Solomon & 4-color). No PCB rework.

 
 
 
 

Pre-Validated Boost Circuit

Test points: PREVGH / PREVGL. Components: 10µH/1A or 47µH/500mA inductors · Si1304BDL/Si1308EDL MOSFETs · MBR0530 diode. -20°C ~ 70°C.

 
 
 
 

Multi-Voltage Front Light

P2: 3.3V ↔ 9-21V • SS1: 9/12/15/21V selection • R14: continuous dimming. Front light and touch connectors are physically isolated to prevent accidental misinsertion damage.

Platform Compatibility
 
 
 
 

Dual-Platform Direct Plug-in

P1 (rear) → Raspberry Pi 40-pin · P8–P10 (rear) → DESPI-M02L. Prototype on Pi, develop on STM32. One board, two workflows.

Boost Circuit
 
 
 
 

Touch Panel Support

P6 for ≤2.9" • P7 for ≥3.7". Note: 2.9" and 7.5" touch panels require reverse insertion. Enables seamless touch + EPD collaboration.

 
 
 
 

EPD FPC & Waveform OTP

P5: 24-pin, 0.5mm pitch. Insert display-side up, press latch. Waveforms pre-burned into OTP — call built-in fast/partial refresh. No LUT tuning.

Development Ecosystem
 
 
 
 

Complete Development Ecosystem

Keil4 example code · full docs · 58.6 × 54.7 mm · 3.3V (front light 5V). 18 years EPD expertise. Validate EPD + touch + light in days, not months.

 
 
 
 

Raspberry Pi & DESPI-M02L

All interface connectors on the rear side for clean stacking. Test EPD display, touch driver, and front light — whether prototyping on Pi or developing on STM32.

Annotated Diagram of the Driver Board

Front Light Voltage Setting

Front Light Brightness Control

Front Light Power Supply

E-paper Resistance Selection

Touch Screen Interface

E-paper Interface

Front Light Voltage Selection

Front Light Interface

Raspberry Pi Interface

DESPI-M02L Main Board Interface

Technology Highlights

Smart Resistor Matching

Smart Resistor Matching

1. 0.47Ω – UltraChip (UC) series driver ICs

2. 2.2Ω – Solomon (SSD) series driver ICs

3. 2.2Ω – Four-color (B/W/R/Y) e-paper displays

Multi-Function Ports

Multi-Function Ports

  1. E-Paper FPC Interface (24-Pin, 0.5mm)
  2. Touch Panel Interface (P6/P7)
  3. Front Light Interface (P0/P2/SS1/R14)
Debugging & Testing

Debugging & Testing

  1. PREVGH – Positive high-voltage test point
  2. PREVGL – Negative high-voltage test point
  3. GND – Common ground test point

STM32-FT01 Platform Compatibility

Raspberry Pi 3.0+ Compatibility

  • ✓ Plug-and-play setup
  • ✓ No extra wiring needed
  • ✓ Space-saving design
  • ✓ Stable and reliable connection
  • Direct Connection: P1 interface (rear side)

DESPI-M02L Mainboard Compatibility

  • ✓ E-paper display testing
  • ✓ Touchscreen driver testing
  • ✓ Front-light display testing
  • ✓ Full STM32 development workflow

Multi-Interface Connection: P8–P10 interface group (rear side)

How to Drive Front-Light Touchscreens Efficiently: Examples

+
+
STM32-FT01

STM32-FT01

=
Complete Solution

Complete Solution

Keyword:
SPI EPD Driver
E-Paper Adapter Board
We could not find any corresponding parameters, please add them to the properties table


PARAMETERS

PRODUCT MODEL

STM32-FT01

FUNCTION

 Support electronic paper, touch screen, and front optical interface;
Support Raspberry Pi motherboard and adapter board docking function;
Support DESPI-M02L motherboard and adapter board docking function;
Facilitate users to quickly master the use of e-paper, touch screen, and front facing light

 OUTSIDE DIMENSION

  58.6x 54.7mm

SUITABLE SIZE

E-paper with SPI interface below 13.3 inches (24PIN)

INTERFACE  24pin and 6pin FPC 0.5mm

POWER INPUT

DC3.3V (Front Light DC 5V)

FEATURE Supports e-paper, touch screen, front light, Raspberry Pi interface
OPERATING TEMP -20~70℃
DEVELOPMENT PLATFORM Keil4
EXAMPLE CODE    Available
RESERVED FUNCTION  Front light brightness adjustment

 

 

 

Related information download

Categories:
STM32
File size:
2.1M
Number of downloads:
2
2026-08-28 13:55:59
Categories:
STM32
File size:
1.5M
Number of downloads:
2
2026-08-28 15:01:57
Categories:
Other Documents
File size:
650KB
Number of downloads:
1484
2024-01-14 11:17:00
Page up
1

Related Products

Previous page
1

Relevant information

Previous page
1

Leave us a message

产品中留言表单

Message

Message

Contact information

Contact information

We will contact you within one working day. Please pay attention to your email.

logo

Time of issue:2020-04-27 00:00:00

Contact

Time of issue:2020-04-27 00:00:00
Powerby:300.cn DaLian

copyright

Time of issue:2020-04-27 00:00:00

©2007-2025    DALIAN GOOD DISPLAY CO., LTD.   Privacy Policy      All Rights Reserved.      ICP08000578-1

Online customer service
Customer service hotline
+86-15504097661 +86-15504097661
Service time:
8:00 - 24:00
Customer service group:
Service Online