Search
Search

banner

/
/
/
24-Pin E-Ink Display HAT Adapter Board | ePaper Module for ESP32 & STM32 (DESPI-C02)
1/1
Number of views:
1000

24-Pin E-Ink Display HAT Adapter Board | ePaper Module for ESP32 & STM32 (DESPI-C02)

Suitable for Serial E Ink Displays (24PIN Interface) Below 13.3 Inches
Number of views:
1000
Product serial number
60700200
Quantity
-
+
OVERVIEW
SPECIFICATION
DOWNLOAD
Official Recommended · Low-Power Driver Solution

DESPI-C02 Adapter Board

Connect 24-Pin SPI E-Paper Displays to MCU Boards — Simplify Driver Development

Compatible Display Sizes: 1.54" / 2.13" / 2.66" / 2.7" / 2.9" / 3.71" / 4.2" / 4.26" / 5.83" / 7.5" / 10.2" / 11.6" / 13.3" and more 24-Pin SPI e-paper panels
Dimensions41 × 22 mm
InterfaceSPI
Display Connector24-PIN 0.5mm FPC
Key ComponentsSI1308EDL,                                  MBR0530
DIP SwitchRESE: 2.2Ω / 0.47Ω
Operating Voltage3.3V
Temperature Range-20°C ~ 70°C
Key Advantages
 
Broad Compatibility
Supports most 24-Pin SPI e-paper displays up to 13.3 inches, meeting diverse display requirements.
 
Plug & Play Design
Direct connection with mainstream development boards, eliminating complex wiring and simplifying development.
 
Smart DIP Switch
Built-in DIP switch for easy resistance adjustment, compatible with UC, SSD and other driver IC series.
 
Debugging Support
Provides power measurement, status detection, and professional voltage test points for circuit validation.
Platform Compatibility

Seamless integration with mainstream development boards for a smooth development experience.

Application Scenarios
  • Embedded & IoT display interface development for low-power systems
  • Rapid prototyping and functional verification of e-paper display modules
  • E-paper driver circuit design and performance tuning
Pin Function Description
Pin Function Description
BUSY Busy status output pin
RES External reset pin (active low)
D/C Data/Command control pin (high = data, low = command)
CS SPI chip select pin (active low)
SCK SPI clock signal line
SDI SPI data input line (MOSI)
GND Ground
3.3V Power supply positive (3.3V)

E-Paper Display Connection

E-paper connection step 1
Click to zoom

Step 1: Flip up the connector latch. Make sure the e-paper display is facing white side up (silver side down).

E-paper connection step 2
Click to zoom

Step 2: Insert the display into the connector, then press the latch down to secure the connection.

Driver Solutions

ESP32 Platform


DESPI-CO2

+
=

STM32 Platform


DESPI-CO2

+
=

ESP8266 Platform


DESPI-CO2

+
=

Arduino UNO Platform


Beyond the Product: Our Four Guarantees

Keyword:
E-paper Display Technology
Driving Circuit
Signal Transfer
Bistable Display
Low Power Consumption
Reflective Display
We could not find any corresponding parameters, please add them to the properties table

Related information download

Categories:
Development Kits
File size:
1.3M
Number of downloads:
3656
2020-05-25 15:31:19
Categories:
Development Kits
File size:
457KB
Number of downloads:
1898
2020-05-25 15:31:48
Categories:
Other Documents
File size:
650KB
Number of downloads:
1440
2024-01-14 11:17:00
Page up
1

Related Products

Previous page
1

Relevant information

Previous page
1

Leave us a message

产品中留言表单

Message

Message

Contact information

Contact information

We will contact you within one working day. Please pay attention to your email.

logo

Time of issue:2020-04-27 00:00:00

Contact

Time of issue:2020-04-27 00:00:00
Powerby:300.cn DaLian

copyright

Time of issue:2020-04-27 00:00:00

©2007-2025    DALIAN GOOD DISPLAY CO., LTD.   Privacy Policy      All Rights Reserved.      ICP08000578-1

Online customer service
Customer service hotline
+86-15504097661 +86-15504097661
Service time:
8:00 - 24:00
Customer service group:
Service Online