Product categories
1.02-inch E-Ink / ePaper Display HAT Adapter Board, 30-Pin DESPI-C102
1.02-inch E-Ink / ePaper Display HAT Adapter Board
Basic function
- Driver circuit: Peripheral Boost Circuit
- Supporting screen: 1.02 inch
- Matching motherboard: STM32、ESP32-L、ESP8266-L、Arduino UNO-L
Basic parameters
- Outline size: 33.8x22.2mm
- Communication Interface: SPI
- Screen Interface: 30PIN 0.5mm
- Key Components: SI1308EDL, MBR0530
- DIP Switch: None
- Operating Voltage: 3.3V
- Operating Temperature: -20~70℃
Auxiliary Functions
- Boost Detection: Reserved boost detection points for convenient fault diagnosis.
- Design Reference: Initial design reference for user product design.

Display Pin Functions
|
Pin Name |
Function Description |
|---|---|
| BUSY |
Busy status output pin |
| RES |
External reset pin (low = reset) |
| D/C |
Data/Command control pin (high = data, low = command) |
| CS |
SPI chip select pin (active low) |
| SCK |
SPI clock signal line |
| SDI |
SPI data input line |
| GND |
Ground |
| 3.3V |
Power supply (positive) |
DESPI-C102
Friendly Reminder: This product uses advanced FPC pressing technology. If you plan to use our adapter board, please note it requires special adaptation for full compatibility. For customization or technical support, feel free to contact our team — we’re here to help.
Leave us a message
产品中留言表单
Message
Contact information
We will contact you within one working day. Please pay attention to your email.
logo
Contact
copyright
©2007-2025 DALIAN GOOD DISPLAY CO., LTD. Privacy Policy All Rights Reserved. ICP08000578-1


